8800 Full automatic rail large reflow oven + PC control 8
temperature zones (up8+down8)
Lead-free SMT Reflow Oven 8800 SMT soldering oven, heating size 3180*500mm
8800 Big-Sized 8 Zones Lead-Free SMT Reflow Soldering Oven
| Model No. | 8800 |
| Heating Parts Parameters |
| Number of Heating Zones | Up8 + Bottom8 |
| Length of Heating Zones | 3180mm |
| Heating Pattern | Full Hot Air (up and down in a small cycle) |
| Number of Cooling Zones | Plasma fan air-cooled plus two-stage liner cooling (length 800MM) |
| Conveyor Parts Parameters |
| Max.Width Of PCB | Mesh width 500mm |
| Conveyor Direction | L→R |
| Conveyor Height | 880±20mm |
| Transmission Agent | Mesh + automatic rail |
| Conveyor Speed Range | 0-2000mm/min |
| Control Parts Parameters |
| Power Supply | 5 Wire, 3 Phase, 380V |
| Start Power | 48KW |
| Power Consumption | Approx 8-10KW |
| Warming Time | Approx 20 mins |
| Temp. Setting Range | Room Temp.-380℃ |
| Temperature Control Method | PC+PID+SSR |
| Temperature Difference Between Adjacent Zone | 70 ℃, can correspond to the highest standards of lead-free process. |
| Temperature Control Precision | ±2℃ |
| Temperature Deviation on PCB | ±2℃ |
| Abnormal Alarm | Temperature abnormal(too high or too low after the constant
temperature keeping) |
| Power-off Protection | UPS |
| Open Way | Electric Screw Rod |
| General Parameters |
| Dimension(L*W*H)mm | 5300*1350*1500 mm |
| Weight | Approx 1800Kg |
Technical features of 8800 reflow oven:
1. Computer + Siemens PLC intelligent control system, with a high
temperature control precision of ±2°C (can work offline without
affecting production in case of computer crashes), ensuring the
stability and reliability of the control system;
2. Windows operating interface, powerful and easy to operate;
3. The upper furnace body opening adopts an electric push rod
automatic lifting mechanism to ensure safety and reliability;
4. Equipped with a mesh belt tensioning device, ensuring smooth,
non-vibrating, and non-deforming transportation, guaranteeing
smooth PCB transportation; Synchronous guide rail transmission
mechanism (can be connected online with fully automatic placement
machines), ensuring precise guide rail width adjustment and long
service life;
5. All heating zones are controlled by the computer using PID
control (upper and lower temperature zones are independently
controlled, and can be opened separately. Zone heating can be used
to reduce start-up power);
6. The mesh belt transmission is fully closed-loop controlled by
the computer, which can meet the simultaneous production of
different types of PCBs;
7. It has a fault sound and light alarm function;
8. Equipped with a leakage protector to ensure the safety of
operators and the control system;
9. Built-in UPS and automatic delay using a turbine heating method,
independent hot air small circulation systems for the upper and
lower layers, uniform temperature, high thermal compensation
efficiency, efficient pressurized air ducts to greatly increase the
flow of circulating hot air, rapid temperature rise (about 20
minutes), high thermal compensation efficiency, capable of
high-temperature soldering and curing;
10. Each temperature zone of the upper and lower layers has an
independent temperature sensing sensor, monitoring and compensating
for the balance of each temperature zone in real-time;
11. The operating system has password management to prevent
unauthorized personnel from changing process parameters. The
operation record management can trace the modification process of
process parameters, facilitating management improvement. It can
store the existing temperature and speed settings of users and
their temperature curves, and print all data and curves;
12. Integrated control window, computer switches, test curves,
print curves, and transmission data can be easily operated, with a
user-friendly design. Equipped with a three-channel temperature
curve online testing system, which can detect the actual
temperature curve of the soldering object at any time (no need for
a separate temperature curve tester);
13. Special pressurized air circulation structure and
special-shaped heating wire design, noise-free, vibration-free,
with a very high heat exchange rate, and a very small temperature
difference △t between the bottom of the components and the PCB
board, which is most in line with the strict requirements of
lead-free processes, especially for lead-free products with high
difficulty soldering requirements.
Real pictures for 8800:
Recommend large SMT production line:
1. PCB loader
2. Full-automatic solder paste printer G5
3. PCB conveyor
4. Pick and place machine TS10 (10 heads)
5. Pick and place machine TM08 (8 heads)
6. PCB conveyor
7. 8 temp. zones reflow oven 8800
8. PCB unloader
Warranty:
The complete machine has a warranty period of 1 year from the time
of purchase and lifetime service.
We always provide spare parts of machine, factory reliable direct
supply.
We provide online Q/A and troubleshooting support and technical
advice service.
Provide one to one after-sale service. Each machine 100% tested well before ship out.
Tech support:
Kimi Mob: 0086 135 106 75756
Skype: kimiliu89
E-mail: kimi@charmhigh-tech.com
Welcome to follow us in YouTube: https://www.youtube.com/@KimiLiuCharmhigh/videos
If you want to see more information and videos, please contact us
by E-mail.
We will response you at the first time.
